Barrel Break-In

by
posted on May 12, 2014
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
qa_ah2015_fs.jpg (41)

undefinedQ: How many rounds does it take to “break in” a barrel?

A: They are several different procedures for breaking in a new barrel, although most use the same basic process. One popular method is to thoroughly clean the barrel between each of the first 15 to 25 shots, then between every two or three shots for the next 10 shots. Finally, several five- or 10-shot strings are fired with a complete cleaning between each. Barrel break-in is typically completed within 50 or fewer rounds and is usually signaled by a noticeable reduction in fouling during cleaning.

Latest

W H2026 10 Hardware W3871 TAH 1989Lead
W H2026 10 Hardware W3871 TAH 1989Lead

Hardware Review: Ruger American Rifle Gen. II Prairie

Clearly, Ruger did its due diligence in building this very accurate Gen. II Prairie bolt action. Minute-of-angle (and better) groups, a crisp trigger, good looks and all of this with in-store prices averaging around $650, depending on the caliber. That’s pretty remarkable.

5 Do-All Big Game Bullets

The cartridge debate rages on, but what about one do-all bullet? Is there one projectile best suited for nearly all the big game species?

2026 Archery Gear Roundup

Check out some of the hottest new archery gear of this season.

Montana Sending a Strong Anti-Poaching Message

In the last 30 days Montana Fish, Wildlife & Parks (MFWP) has completed a variety of investigations and reported sentences that have followed others. The announcements are a stark reminder to follow every rule, poaching is not hunting and sportsmen are not shy about turning in violators.

Range Review: Ranger Point Precision Enhanced Rossi R95 Trapper

This compact .45-70 Government lever gun from Rossi only gets better with Ranger Point Precision aluminum furniture installed!

#SundayGunday: Henry SPD Predator

Coming out of the skunkworks lab at Henry Repeating Arms is one lever-action series mighty enough to bear Supreme in its nomenclature. And given the fact this is a Special Products Division (SPD) rifle, it’s sure to host a few features otherwise not-so-standard on yesteryear’s lever gun. The SPD Predator is the focal point of this range session. So, let’s take it shooting and run through some details.

Interests



Get the best of American Hunter delivered to your inbox.