Hunter: “I have a new .300 Winchester I bought, but I don’t like it and it’s not very accurate. I also have a .270—I’ve shot a lot of deer with that."
Outfitter: “How well can you shoot that rifle?”
Hunter: “I can’t hit paper, but I am deadly on anything with hair.”
Outfitter: “Sigh … Just bring the one you can shoot the best.”
When it comes to guns and hunting there are several myths that are repeated too often by gun writers, gun store counter jockeys and shooting range experts. Oftentimes there is a bit of truth in them, but usually it’s lazy thinking.
Shoot the Best Rifle for the Hunt The advice “take the gun you shoot best” on an important hunt is a great example. Of course, you need to be able to shoot your rifle well. But bringing an inadequate rifle cartridge on an important hunt, just because you won’t bother to master a proper rifle, is a lazy approach to the problem. Also, it’s very likely that the guys who complain they can’t shoot the bigger gun probably are not all that great with any rifle.
The outfitter just wants to fill his hunts and run his business. It’s not his job to teach the hunter about shooting or ballistics. If he has been running hunts for long and knows guns, then he understands. The client is probably an Eastern hunter who shoots whitetails at 50 or 60 yards and is bragging to anybody who will listen about how he has been hunting with that rifle for 15 years and is still using the same box of ammo he bought with the gun. The truth is, the hunter probably isn’t very good with the .270 either, but at least he is not afraid of it.
The outfitters you won’t hear this from are folks running dangerous-game hunts. I know one very experienced brown bear outfitter who tells hunters to bring at least a .375 H&H Mag. or stay home. Nobody in Africa tells you to “just bring the gun you shoot best” for a dangerous game hunt. A .220 Swift will kill a Cape buffalo; it’s been done. But not only is it illegal for dangerous game in many places, only a fool would guide a hunter shooting a completely inadequate cartridge. If you wound an elk with a marginal rifle it’s a lost elk. Heartbreaking to be sure, but nobody dies. A wounded buffalo, bear, lion, leopard, elephant, etc. can break a lot more than your heart. Clients who are stomped and gored don’t tip very well. If the outfitter is stomped, bitten, clawed or gored trying to fix the mess the client made with the wrong gun, he can’t feed his family anymore. If the locals are on the receiving end, the professional hunter can be in danger of losing his business. So they tell you to bring an adequate rifle and leave it to you to figure out how to shoot it. If you fail, they bat cleanup with their rifles. Rest assured, it’s always a big caliber.
Anything less than using a rifle compatible with the game hunted is compromise on a path to failure. If you are booking a whitetail hunt in Saskatchewan and insist on bringing your .243, you open that failure door. Sure, it will kill deer. I have shot a lot of deer with a .243. But with those big-bodied, winter-tough bucks, your odds for a heartbreaking loss go up by a lot. It’s always best to spend a lot of time and a little money to learn how to shoot a proper rifle well.
The problem is recoil. People are scared of hard-kicking rifles. Recoil is a result of the weight of ejecta, which is the weight of bullet and the powder charge and the exit velocity. This is calculated against the weight of the rifle to give the foot-pounds of energy that a shooter feels at the shoulder. It is physics and it’s pretty well fixed. For example, a 9-pound rifle shooting a .243 100-grain factory load will produce 8.46 ft.-lbs. of felt recoil. The same rifle in .300 Winchester Magnum with a 180-grain bullet at the same velocity will produce 27.4 ft.-lbs. of felt recoil. Quite a difference. However, I contend that any adult hunter, barring medical issues, can learn to shoot both rifles with equal accuracy. It’s all a matter of managing the felt recoil and practicing.
There is no reason to be afraid of recoil. It’s not as brutal as people think. The first thing any shooter has to understand is that recoil will not damage you. I once fired a .600 Nitro Express double-barrel rifle and both barrels went off at the same time. That resulted in nearly 300 ft.-lbs. of energy hitting my shoulder. I survived with no lasting effects. In fact, I shot my best whitetail at 409 yards the next morning (with a different rifle of course). So a rifle with just 10 percent of that recoil would seem acceptable to hunt with, right?
The key is to control the effects of the felt recoil; that is what the shooter experiences at his shoulder. There are a lot of ways to do that.
Stock Design First and probably most important is the stock design. Frankly a lot of factory stock designs fall into the category of, “That’s how we have always done it,” which doesn’t do much to explain why they suck. My first .300 Winchester from far too many years ago pounded me unmercifully. I hated that Remington 700 BDL and was about to sell the gun. Then I got an assignment to write about one of the new synthetic replacement stocks that were emerging on the market. I fitted one of the stocks to my .300 Winnie and I was astounded. It felt and acted like a completely different rifle. The gun became pleasant to shoot and oddly enough it was a lot more accurate. (No doubt that had nothing to do with me no longer flinching.) I was traded out of the gun and I can’t remember who made the stock. I was using a typewriter back then and can’t find the article. (No spell checker with that thing either, it’s a wonder I made it as a writer!)
I have a wildcat, the .358 UMT, which is based on the Remington Ultra Mag cartridge. This gun will push a 225-grain bullet well over 3000 fps. The rifle is pretty light, so in theory, it should kick the snot out of your sinuses. But it does not. Mark Bansner built the gun and it wears one of his High Tech stocks. The first thing everybody who has shot it says is, “Gee, that kicks a lot less than I expected.”
Recently I traded for a .458 Lott custom rifle built on a Mauser action. It was fitted with a beautiful walnut stock. In fact, it is the best piece of wood on any rifle I have ever owned. I shot the rifle seven times and had to quit. The next day I had a black eye and I looked like I had been in the ring with Tyson. (For the record, I think I could take him.)
That experience would lead a lot of people to believe the .458 Lott is too much gun. But, I know better, having shot several of them over the years. The problem is the stock design. The butt on this one is cut at an angle to the bore. (It’s called pitch.) The Monte Carlo comb rises to a point right where it contacts my face. When the gun fires it drives the cheekpiece into my face with considerable force.
So I called Bell and Carlson and ordered a new stock to tame this beast. I will miss the “pretty” wood stock, but I wanted this gun to hunt with, not look at.
Another often repeated myth is that a synthetic stock makes a gun feel like it kicks less because it absorbs the recoil energy. I have written it myself. But, that was a while back and I no longer entirely believe it—or at least the part about the stock absorbing recoil energy. I think that theory got started back when we were replacing stocks on existing firearms. The stocks we put on, like the stock on my .300 Winchester, were designed better to mitigate recoil. Everybody assumed it was the synthetic aspect that was changing the felt recoil when in reality it was probably the design. Today a lot of companies are installing cheap injected-molded stocks with the same flawed design as their old wood stocks. Those I have shot seem to kick just as hard as the guns with wood stocks.
A wide butt plate that is square to the bore reduces the beating on your face. A stock with a lot of pitch on the recoil pad, like a lot of factory guns and my pretty .458 stock, use the pitch angle like a cam when the gun fires. It forces the muzzle up and the comb smacks your cheekbone. With a square (or nearly square) pitch, the gun recoils straight back and spares your pretty face. This also keeps the muzzle rise down and helps speed the next shot. The comb should be straight or sloping slightly forward so the gun recoils away from your cheek. Again, this keeps your face from taking a beating. The stock should of course have one of the newer high-tech recoil pads to cushion your shoulder and to absorb some of the recoil energy. A wide butt also helps dissipate the recoil; a thin butt pad will hurt you. It’s important, too, that the stock fits you. If you are very large with long arms or are on the small side, then the factory stock designed for the “average” person is not going to fit well. Have a competent gunsmith adjust the length of pull to fit your body size.
Add Weight The weight of a gun is a huge factor in felt recoil. The heavier the gun, the less you feel the recoil. But, you have to carry a hunting gun, so it’s a compromise. If you just walk to your deer stand and sit down, you may use a much heavier rifle than if you are elk hunting and climbing mountains all day.
You may want to add a mercury recoil-reducing tube, or even two. My .416 UMT has three. These sealed tubes are filled with high-viscosity and heavy, liquid mercury to absorb some of the recoil energy. Mercury is heavy, 13.53 grams per cubic centimeter, while lead is 11.34. Remember, “A body at rest wants to stay at rest”? Using that law of physics, the mercury tube reduces recoil. Installation is easy for a DIY hunter or inexpensive for a gunsmith to do. Brownells sells the tubes in a variety of sizes. You can also order one installed in a new Bell and Carlson stock from the company’s factory as I did with the new stock on my .458 Lott. They are safe, as the mercury is sealed inside the metal tube.
I have also used a redneck gunsmith, poor man’s approach to adding weight by mixing No. 9 shotgun pellets with fiberglass-infused Bondo. I find or create space in the stock and fill it with the mixture. I have a .375 RUM, a very hard kicking cartridge, that I added weight to in this way. It tamed the recoil and the rifle survived a safari in Tanzania for Cape buffalo and several more hunts for a lot of other game.
Customize the Muzzle A good muzzle brake will greatly reduce recoil. Many factory-produced rifles now are sold with brakes installed. Most gunsmiths can install one on your rifle. However, a brake is very loud; so loud that a lot of guides and professional hunters will not allow them on a hunt. One approach is to use the brake to practice and then remove it before the hunt and screw on a thread protector in its place. Recoil is not as noticeable when you are shooting at game. Just make sure you re-zero your rifle as point of impact can change.
Mag-na-Port is a process that cuts two or more trapezoid slots into the barrel. This allows the gas to rush out of them like a jet to reduce muzzle rise and recoil. Accuracy and velocity are not affected. I have rifles that are Mag-na-Ported and they are not anywhere near as loud as a brake. I highly recommend this on any brutish hunting rifle. (I plan to send my .458 Lott to be Mag-na-Ported.)
A suppressor can help, too. Lately, American hunters are catching up with much of the rest of the world and are using suppressors (also called silencers) for hunting. Suppressors are still, foolishly, a National Firearms Act (NFA) regulated item so you must get permission from the government and pay them $200 for the privilege of protecting your hearing. But, it’s worth the trouble. Hunters love them not only because they reduce noise, but also because a suppressor greatly reduces felt recoil. Think of it as a brake that’s wearing a muzzle to shut it up. If you buy yours from Silencer Central, the company will handle all the paperwork. I did and it was simple and easy.
Use Low-Recoil Ammo Using low-recoil ammo can help ease you into learning the rifle. Just be sure to switch to full-power ammo for the last several practice sessions before the hunt.
There was a time when most of the major ammo makers offered low-recoil ammo in many rifle cartridges. I think the last man standing is Hornady with its Custom Lite Reduced Recoil ammo.
Handloading is perhaps the best way to tailor the reduced-recoil ammo to your needs. Hodgdon offers instructions on its website.
Or you can turn to a custom loading company. Nyati Inc. specializes in reduced-recoil ammo for big-bore rifles. I tested its ammo some years ago for a magazine article and found the quality and performance from the custom loader to be excellent.
Another source is Phil Massaro, a name often seen as a byline in this magazine. Phil also owns Massaro Ballistic Labs, which is a custom handloading company. He can load reduced-recoil ammo for your specific rifle. I have tested Phil’s ammo in several rifles and have found it to be high quality and highly accurate.
I would be remiss if I didn’t note that during this time of ammo and component shortages these sources may not be able to supply what you need right away. So order early and be prepared to wait.
Tame Bench Sessions The most common time that a hard-recoiling rifle will hurt you is when you are shooting off a bench. But a bench session is necessary to evaluate ammunition and to zero the rifle. The best solution I have tried is the Lead Sled. I like the simplicity of the original design the best. I keep hearing those repeated rumors about how the Lead Sled will break scopes or split stocks. I have literally fired thousands of rounds from hundreds of rifles, including a .500 Nitro Express, on a Lead Sled and have never experienced a single problem. I think that’s another one of those myths that keeps being repeated without any actual experience.
Just make sure you use a Lead Sled correctly and fill the tray with bags of lead shot. I had a friend who bought one and complained bitterly that it didn’t work very well. He brought it one day to shoot with me. He was setting it up and, trying to help, I looked in his truck.
“Where is your lead?” I asked.
He never was big on reading directions.
I think shooting from the bench is crucial to preparing the rifle. But, with a big kicker, the sooner you get off the bench and start shooting from field positions the sooner you will realize this rifle is not so bad.
Use Proper Shooting Technique Learn to shoot with the proper stance, which will help you absorb recoil. Spread your feet shoulder-wide with your off-side (left side for a right-handed shooter) foot forward so the heel is even with the strong-side toe. Lean forward a little and shift about 60 percent of your weight to the front foot. Keep the weight on your toes, not your heels. The knees are bent slightly and the toes point to the right of the line to the target. The right leg (right-handed shooter) is behind and almost straight, with a slight bend so the knee is not locked and with the toes pointed about 90 degrees to the line of sight to the target. Put the buttstock on your shoulder, fitting it in the pocket formed when you roll your shoulder forward, and lean forward a bit to firm up your stance. This weight-forward stance will let you manage recoil and you will think that you are shooting a much different rifle than you had on the bench. You may learn more nuanced shooting techniques down the road. For now, remember a PAST recoil pad shield can help take the sting off your shoulder regardless which technique you use.
Practice a little bit, a lot of times. How much depends on you. I have fired 75 rounds or more in a short practice session with guns as big as the .500 NE. That was too much. I suggest 10 rounds to start. Then shoot more as it becomes more and more comfortable.
I know ammo is expensive (and hard to find right now) but shooting is the only way to learn the rifle. Mitigate the recoil and then practice shooting. It won’t be long before you are shooting much better than you ever did with that wimpy little .270!