Winchester Super X Pump

by
posted on January 7, 2011
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
201117103432-win_m.jpg

Winchester likes to call the SXP “the pump that thinks it’s an autoloader” due to its fast, slick cycling. The first time I tried the gun at the SHOT Show, I loaded two shells to test that claim. I fired, then pulled on the slide. It wouldn’t budge. Puzzled, I looked at the gun. The slide wouldn’t move because it was already back, the empty already ejected and smoking on the ground. The gun is so smooth I had opened the action without knowing it. The same thing happened the next time I shot it. Once I figured out all I had to do was pull the trigger and flick the slide forward, I could shoot this gun very fast.

The Super X Pump is the latest version of Winchester’s Model 1300 “Speed Pump,” which hasn’t been made since 2005. Introduced in 1978, the 1300 was an improved Model 1200, which was the notorious low-cost 1964 replacement of the legendary Model 12. While both the 1200 and 1300 suffer in comparison to one of the greatest shotguns ever made, they were a good value, finding a niche competing with the Mossberg 500 and the Remington 870 Express. The 1200 and the 1300 both feature a rotary bolt that unlocks and opens very quickly and is the secret to the action’s speed.

The 1300 was made in the New Haven, Conn., Winchester plant until it closed in January 2006. At the time, Winchester management agreed with the union not to make the 1300 for three years. Winchester re-engineered the gun, renamed it, and found a Turkish vendor to produce it. Those guns are coming into the country now in 3-inch, 12-gauge, both as an 18-inch, cylinder-bored Defender model and a field gun with a 26- or 28-inch barrel. My test gun was a field model with a 28-inch barrel.

The SXP is not a Turkish-designed gun with an American brand. It’s a gun made to Winchester’s specifications in Turkey. The new gun combines the lines of the popular Super X3 semi-auto, the old fast-pumping action, and several significant improvements over the old model. Says Glenn Hatt, Winchester product manager: “This gun will function better than any 1300 ever made.”

Available in black synthetic, the 1300 takes styling cues from the Super X3. The stock has the X3’s semi-Cubist pattern of lines and planes. Red W’s here and there decorate the stock and receiver, and it even has replicas of the X3’s Quadra-Vent in the forearm. Of course, gas vents on a pump serve no purpose; they’re like the chromed, fake vent holes on the sides of 1950s cars.

More significantly, the SXP has the X3’s rib profile and stock dimensions, a near-parallel comb arrangement that fits many shooters. It also has the soft “Inflex” recoil pad with a hard insert on the heel found on the X3 and Browning Maxus semi-autos. The barrel is bored to Browning’s standard overbore of .742, and the gun takes Invector-Plus chokes.

Among the changes to improve the durability of the SXP is the elimination of the distinctive “fishtail,” V-shaped joint between the head of the stock and the rear of the receiver. The new straight-line joint is much stronger, while the receiver itself is made of aircraft-grade aluminum that is tougher than the impact-extruded aluminum of the old guns. Inside, the action bars and the plate upon which the bolt sits have been made from three pieces into one. Not only does that make the gun much easier to take apart—you can remove the action bars and bolt as one piece—it eliminates a source of wiggle and wear that was a weakness of the old design.

After shooting the gun at the SHOT Show, I was reunited with it in Iowa and took it to the skeet field. I found it easy to shoot and smooth to cycle. With its light weight of 6 pounds, 14 ounces, it would make a good upland or turkey gun. The matte finish and sling swivel studs make it suitable for waterfowling, too.

What don’t I like about it? The styling isn’t for me. I much preferred the traditional lines of the Super X2. Also, I prefer safety buttons at the rear of the trigger guard, not at the front where the SXP’s safety is located. Unfortunately the safety does not reverse easily for left-handed use, nor does the gun come with spacers to adjust its short 133/4-inch length of pull.

The SXP lists for $399, putting it in competition with the 870 Express and 887, the Benelli Nova and the Mossberg 500. All five have something to offer. With Winchester you get a better recoil pad, an over-bored barrel and longer choke tubes. Among the $400 pump guns, the SXP appears poised to give the rest a fast shuck for their money.

Specs:

801-876-3440, winchesterguns.com
Type: pump-action shotgun
Gauge/Chamber: 12-ga. / 3"
Sights: front bead
Safety: cross-bolt; forward in trigger guard
Stock: black synthetic; length of pull—13 3/4"; drop at heel—2"; drop at comb—1 3/4"
Overall Length: 49"
Weight: 6 lbs., 14 ozs. (w/ 28" barrel)
Metal Finish: matte black
Accessories:
 IC, Mod. and Full choke tubes
Price:
 $399

Latest

Lededrones For Hunting
Lededrones For Hunting

Drones for Downed Game Recovery

Ready to launch your shiny new Mother’s or Father’s day drone to locate that trophy buck hideout? Doing so nearly anywhere in the U.S. makes you a poacher. There is, however, a growing roster of states that allow the use of drones to locate downed game.

Cartridge Legacies: The .308 Winchester Family Tree

I suppose it is fair to say that if you want to find the true legacy of a cartridge, you could look to its offspring and the successes and/or failures of the family. Let’s look at the .308 Winchester’s family tree, at the instant successes, and those children which have lagged behind over the years.

New for 2026: Primary Arms Optics PLx Compact 1.5-12x36

Primary Arms Optics has released its PLx Compact 1.5-12x36mm FFP RDB, the latest addition to its PLx Compact lineup. The optic pairs Japanese ED glass with a 1.5-12x magnification range and Red Dot Bright diffractive reticle technology, all on a 30mm chassis that measures 9.75 inches long and weighs 19.67 ounces.

Hardware Review: Springfield Model 2020 Boundary

Looking for an accurate bolt action that can tackle just about any sort of terrain? Look no further than the Model 2020 Boundary, from Springfield. Check out David Herman's Hardware Review of the gun here.

New for 2026: MDT HNT Fixed Buttstock and LSS Gen3 Hunting Forend

MDT has released two carbon-fiber components for hunters running XTN-interface chassis systems: the HNT Fixed Buttstock and the LSS GEN3 Hunting Forend.

Gear Roundup: Tech Savvy Hunting

Looking for the latest in high-tech shooting and hunting gear? Look no further, for some of the most cutting-edge equipment sure to make your next range or field session a breeze.

Interests



Get the best of American Hunter delivered to your inbox.