I knelt on the tundra, doing my best imitation of a blueberry bush, hoping the advancing caribou bulls would buy it. If they came another 75 yards, they would cross 40 yards in front of me. A slam dunk bow shot.
The problem was the crosswind whipping right to left at about 25 miles an hour. When I raised my bow to draw and shoot, the wind pushed stiffly against my bow quiver, which was filled with five hunting shafts. To minimize the problem I had positioned myself in a shallow depression and knelt as low as I could and still shoot. When the time came I made the shot, one that under normal circumstances would have been pretty routine but was instead quite a challenge.
Bow vs. Non-Bow-Attached Quivers
To sum up what I’ve found since that time, using a bow-attached quiver will certainly affect your shooting. However, under most hunting situations the degree that it does so is so insignificant as to be inconsequential.
My good friend Jim Velasquez has been in the archery business for decades. For many years he has owned Sagittarius, a quiver manufacturer that marketed quivers directly to consumers as well as private labeled quivers to several major bow makers. He’s also owned an archery pro shop, and currently works for another in the San Diego, California area.
Here’s his take on the topic:
"I don't believe that most people can see the difference, once they start shooting the bow with a quiver full of arrows,” Velasquez said. “You definitely have to tune the bow and sight it in with the quiver attached, then you'll be used to it and it will not significantly affect accuracy.
“A bow quiver can be heavy when full of hunting arrows, making it harder to steadily hold the bow up when aiming and shooting,” Velasquez said. “However, this is minimal. We have found that a lot of guys have gone to using quivers that hold 4 or 5 arrows rather than the 8-arrow quivers that were popular a decade ago, even out West, because this lightens the bow up and also reduces mass and vibration.”
To back up his contentions, Velasquez did some serious testing using a shooting machine. This machine shoots the bow, eliminating any human discrepancies so that each and every arrow is released exactly the same.
Here’s what he found:
“We used the shooting machine so we could see exactly what the differences would be with and without an attached bow quiver and without human error on the shooting,” Velasquez said. “We shot out to 40 yards, and shot in excess of 400 arrows, using 4, 6, and 8 arrows in the quiver. The bows were all properly tuned both with and without the quiver attached. We never saw any difference in point of impact between the two. When we went down from 8 arrows to one arrow in the quiver, we saw a very insignificant point of impact change, but not enough to make any difference in a person's ability to hit a kill zone in hunting situations out to 40 yards.”
Quiver Design Improvements
“This is critical with a bow quiver,” Velasquez said. “The closer to the bow’s center line the quiver sits, the less torque you have.”
Non Bow-Attached Quivers
Some spot & stalk hunters prefer the hip quiver, but for me the disadvantages outweigh any small accuracy gain that may result. These disadvantages include the fact that you can't comfortably sit on the ground with the quiver on your belt, the arrows tend to smack noisily into brush and limbs, and it is very hard to crawl and duck under objects. For me, a bow quiver is the most simple and efficient method of field arrow transport.