Hunting

Redding Reloading G-Rx Carbide Die Set

Based on the overwhelming success of the original G-Rx die set, Redding offers a new Carbide version of the G-Rx for 2010.

4/13/2010

Redding Reloading Equipment has always responded to the reloading market's needs with innovative and high quality solutions to the unique problems encountered by the dedicated handloader. Based on the overwhelming success of the original G-Rx die set, Redding offers a new Carbide version of the G-Rx for 2010. The Carbide Set will also include the Redding 'Easy Feed Pusher" to further increase speed and ease of use for the high volume 40 S&W reloader.

Due to the customer response to the original G-Rx coupled with customer feedback on a wish for lubeless carbide sizing, Redding responded for 2010 with the easiest and fastest method to restore 40 S&W cases to reliably function when reloaded.

Like the original Redding G-Rx die set, the new set is comprised of a pusher rod which fits into the ram like a shell holder plus the unique carbide push through sizing die with lock ring. To use, the case is set in the top of the "Easy Feed Pusher." Then the ram is raised to push the case entirely through the die. The die has a rebated section at its top to hold the finished case so that it may be easily removed. With the Redding G-Rx Die Set, you can remove the bulge from literally hundreds of cases per hour preparing them for the reloading process, and now it can be a lube free operation.

Redding offers numerous unique solutions to improve the accuracy, consistency and reliability of your handloaded ammunition. For more information, go to www.redding-reloading.com.

Share |

Comments

ADD YOUR COMMENT

Enter your comments below, they will appear within 24 hours


Your Name


Your Email


Your Comment

No comments yet, be the first to leave one below.