Gear > Ammunition

Federal Prairie Storm

Federal has applied the superior waterfowl killing technology of Black Cloud to a shotshell designed specifically for pheasant hunters—Prairie Storm.

9/28/2010

In 2007 Federal changed the rules with steel shot when the company introduced Black Cloud ammo. The concept was to fix the pattern problems that are associated with steel shot. Steel tends to clump in the middle and leave the outer fringes of the pattern skimpy. So the Federal engineers designed a new pellet with a belt they call “FlightStopper” (FS). Most people describe the pellet as looking like the planet Saturn. The different aerodynamics of this pellet design caused it to fly differently than normal steel pellets and to migrate out in the pattern to fill the holes in the edges.

An unexpected side effect was the increased killing power of these new pellets. It became apparent to hunters, including myself, that Black Cloud killed waterfowl much better and faster than conventional steel. Sure, some of that was due to better patterns, but most of it was because of the superior terminal performance of the new belted pellets.

So, of course, Federal started looking at other areas where this technology could be applied. The result is this year’s introduction of Prairie Storm upland game ammo.

Prairie Storm uses lead pellets, but with a twist. Federal added belted lead pellets they are calling Flightstopper Lead. The buffered shot is 70 percent copper-plated lead shot and 30 percent nickel-plated FS Lead belted pellets. They put these in the tried and true, rear-braking FlightControl wad that was developed for turkey hunting, which has migrated to waterfowl and now upland ammo as well. This solid wad does not have slits in the cup and it is not designed to open up like a conventional wad. Instead it has “wings” that pop out in the rear once the wad is free from the shotgun barrel. These wings create drag and pull the wad back away from the shot column. The result is much tighter and more consistent downrange patterns.

“We realize that many pheasants are shot at 15 or 20 yards as well as at long range,” Federal’s Tim Brandt told me. “So we wanted to ensure that the patterns with Prairie Storm ammo were not any tighter up close than conventional shotshell ammo. But at the same time, we wanted to maintain pattern density for longer-range shots as well. By using this mix of shot we achieved that goal. We found that 11/4 ounces of No. 4 shot would put 75 percent of the pattern in a 30-inch circle at 40 yards with a modified choke. So you don’t have to switch to a tighter choke in the late season when the birds are getting skittish, which can make you miss those close birds.”

The concept is that you will have even, edge-to-edge patterns that open early, but maintain pattern density for longer range. When that is coupled with the added terminal performance of the new nickel-plated, FS Lead pellets, the result is a deadly upland shotshell load. While the target market is pheasant hunting, I can see how this load will work well for a wide range of upland hunting for the larger bird species. There is a decided lack of pheasants in Vermont where I live, but I am planning to put Prairie Storm ammo to use for late-season grouse in the fall, and next winter while hunting snowshoe hares with dogs.

Share |

Comments

ADD YOUR COMMENT

Enter your comments below, they will appear within 24 hours


Your Name


Your Email


Your Comment

8 Responses to Federal Prairie Storm

Xavier wrote:
November 03, 2014

I've been through their factory. They make ALL of their components in house. Nothing comes from China. How does this BS get started?

Anthony wrote:
February 11, 2013

Every 2 to 3 shots did not fire. I am sure sure if I had a quirky box but it was frustrating. I noticed the primer was inset a little bit more then my normal Remington loads. When they did fire, they really packed some punch on both ends of the gun. I was impressed with how fast they dropped birds but if they misfire like that again, I will be looking to donate a few boxes.

wayne webber wrote:
October 21, 2012

Glad to know Federal is using Chinese components in these shells. I was about to buy some for a Chukar hunt but NO Thanks Federal - you can keep 'em. I prefer to employ americans first.

Rod Taylor wrote:
October 10, 2011

Perhaps if we made the steel here more Americans would have jobs and be able to afford Prairie Storm. Unions are not the problem, bad international trade agreements are. Cheap is costly.

Tommy Emerson wrote:
May 12, 2011

if Chinese steel is cheaper, doesn't bother me. We could produce it here, but the unions make everything more expensive in the US.

Bill Rhodaberger wrote:
December 22, 2010

Does it bother anyone that Federal uses 100% Chinese steel shot for the black cloud ammo and now 100% Chinese lead shot for the Prairie Storm shell. Maybe the awards program should be moved to Bejing?

Chris wrote:
October 18, 2010

I think RWS(?) already has been upgrading the Brenneke design over the past several years. I can't see much really to be done to "improve" the Foster types except some things like Truball.

everet wrote:
September 29, 2010

about time they stopped resting on their laurels,now improve 'slugs'